Ruckus 901-T610-WW01 Outdoor Access Points Supplier in Doha Qatar

RUCKUS T610 Specification WI-FI Wi-Fi Standards IEEE 802.11a/b/g/n/ac Wave 2 Supported Rates 802.11ac: 6.5 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80) 802.11n: 6.5Mbps to 600Mbps (MCS0 to MCS 31) 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 802.11b: 11, 5.5, 2 and 1 Mbps Supported Channels 2.4GHz: 1-13 5GHz: 36-64, 100-144, 149-165 MIMO 4×4 SU-MIMO 4×4 MU-MIMO Spatial Streams 4 SU-MIMO 3 MU-MIMO Radio Chains and Streams 4×4:4 Channelization 20, 40, 80MHz Security WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 802.11i, Dynamic PSK WIPS/WIDS Other Wi-Fi Features WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v Hotspot Hotspot 2.0 Captive Portal WISPr RF Antenna Type BeamFlex adaptive antennas with polarization diversity Adaptive antenna that provides up to 4,000 unique antenna patterns Antenna Gain (max) Omni -Up to 3dBi Sector -Up to 8dBi Peak Transmit Power (aggregate across MIMO chains) 28dBm for both 2.4GHz & 5GHz BeamFlex SINR Transmit Power Gain* Up to 6 dB BeamFlex SINR Receive Power Gain* Up to 4 dB Minimum Receive Sensitivity1 -104dBm Frequency Bands ISM (2.4-2.484GHz) U-NII-1 (5.15-5.25GHz) U-NII-2A (5.25-5.35GHz) U-NII-2C (5.47-5.725GHz) U-NII-3 (5.725-5.85GHz) Performance and Capacity Peak PHY Rates 2.4GHz: 600Mbps 5GHz: 1733Mbps Client Capacity Up to 512 clients per AP SSID Up to 31 per AP Ruckus Radio Management Antenna Optimization BeamFlex Polarization Diversity with Maximal Ratio Combining (PD-MRC) Wi-Fi Channel Management ChannelFly Background Scan Based Client Density Management Adaptive Band Balancing Client Load Balancing Airtime Fairness Airtime-based WLAN Prioritization SmartCast Quality of Service QoS-based scheduling Directed Multicast L2/L3/L4 ACLs Mobility SmartRoam Diagnostic Tools Spectrum Analysis SpeedFlex Networking Controller Platform Support SmartZone ZoneDirector Unleashed2 Cloud Standalone Mesh SmartMesh™ wireless meshing technology. Self-healing Mesh IP IPv4, IPv6 VLAN 802.1Q (1 per BSSID or dynamic per use based on RADIUS) VLAN Pooling Port-based 802.1x Authenticator and Supplicant Tunnel L2TP, GRE, Soft-GRE Policy Management Tools Application Recognition and Control Access Control Lists Device Fingerprinting Rate Limiting IoT Capable Yes Physical Interfaces Ethernet 2 x 1GbE ports, RJ-45 LACP USB 1 USB 2.0 port, Type A connector Physical Characteristics Physical Size 31.7(L) x 24.1(W) x 9.5(H) cm 12.8(L) x 9.5(W) x 3.7(H) in Ingress Protection IP-67 Mounting Wall Mount Pole Mount Flat Surface Mounting bracket sold separately – see Optional Accessories section Operating Temperature -40°C (-40°F) to 65°C (149°F) Operating Humidity Up to 95%, non-condensing Wind Survivability Up to 266 km/h (165mph)