Ruckus 901-T310-WW61 Outdoor Access Points Supplier in Doha Qatar

901-T310-WW61 Specification WI-FI Wi-Fi Standards IEEE 802.11a/b/g/n/ac Wave 2 Supported Rates 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS=1to2 for VHT20/40/80 802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15) 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 802.11b: 11, 5.5, 2 and 1 Mbps Supported Channels 2.4GHz: 1-13 5GHz: 36-64, 100-144, 149-165 MIMO 2×2 SU-MIMO 2×2 MU-MIMO Spatial Streams 2 SU-MIMO 2 MU-MIMO Radio Chains and Streams 2×2:2 Channelization 20, 40, 80MHz Security WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 802.11i, Dynamic PSK WIPS/WIDS Other Wi-Fi Features WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v Hotspot, Hotspot 2.0 Captive Portal WISPr Antenna Type BeamFlex adaptive antennas with polarization diversity BeamFlex SINR Transmit Power Gain Up to 6 dB Ruckus Radio Management Antenna Optimization BeamFlex Polarization Diversity with Maximal Ratio Combining (PD-MRC) Wi-Fi Channel Management ChannelFly Background Scan Based Client Density Management Adaptive Band Balancing Client Load Balancing Airtime Fairness Airtime-based WLAN Prioritization SmartCast Quality of Service QoS-based scheduling Directed Multicast L2/L3/L4 ACLs Mobility SmartRoam Diagnostic Tools Spectrum Analysis SpeedFlex Networking Controller Platform Support SmartZone ZoneDirector Standalone Mesh SmartMesh™ wireless meshing technology. Self-healing Mesh IP IPv4, IPv6 VLAN 802.1Q (1 per BSSID or dynamic per use based on RADIUS) VLAN Pooling Port-based 802.1x Authenticator & Supplicant Tunnel L2TP, GRE, soft-GRE Policy Management Tools Application Recognition and Control Access Control Lists Device Fingerprinting Rate Limiting IoT Capbale Yes Physical Interfaces Ethernet 1 x 1GbE port, RJ-45 USB 1 USB 2.0 port, Type A Ingress Protection IP-67 Physical Characteristics Physical Size 18.1(L) x 15.1(W) x 7.9 (H) cm 7.1(L) x 5.9(W) x 3.1(H) in. Ingress Protection IP-67 Mounting Wall, Drop ceiling, Desk Pole Mount Diameter 1″ to 2.5″ Operating Temperature -20ºC -(4ºF) to 65ºC (149ºF) Operating Humidity Up to 95%, non-condensing Performance And Capacity Peak PHY Rates 2.4GHz: 300Mbps 5GHz: 867Mbps Client Capacity Up to 512 clients per AP SSID Up to 31 per AP