Description ACCESS POINT-PTP670 Features: RF Bands: 4.9 to 6.05 GHz, wide-band operation within country regulations. Channel sizes: 5/10/15/20/30/40/45MHz (subject to national laws). Maximum spectral efficiency of 10bps/Hz. Dynamic spectrum optimization for reduced interference. Up to 27dBm maximum transmit power. System Gain: Up to 164dB with integrated 23dBi Flat Panel Antenna. Fast Preemptive Adaptive Modulation with 13 levels of modulation. Time Division Duplex (TDD) with optional synchronization. Range: 155 miles. FIPS-197 compliant 128/256-bit AES encryption (optional). Low latency: 1-3 milliseconds in one direction. Extended QoS with support for up to 8 queues. Layer 2 and Layer 3 IEEE 802.1p, MPLS, and Ethernet priority packet classification. Line rate (>850k packets per second). Synchronous Ethernet and IEEE 1588v2 Timing Transport. Jumbo frames up to 9600 bytes in PTP mode, 2000 bytes in HCMP mode. Flexible I/O: Two copper Gigabit Ethernet ports, one SFP port. T1/E1 TDM Support: (8) T1/E1 TDM (NIDU). IPv6/IPv4 dual-stack management capability. Integrated audio and graphics link optimization aid. Mobile Modules Master: Supports up to 8 maximum nodes. Channel bandwidth: 20 and 40 MHz. Spectral Efficiency: 8bps/Hz. Latency: 2 to 4 ms in HCMP Mode (typical). Dimensions: 305 x 305 x 81mm (12 x 12 x 3.2 inches). Weight (with bracket): 4.1 kg (8.95 lbs). Operating Temperature: -40 to 140°F (-40 to 60°C). Water-Dust Infiltration and Wind Speed Survival: IP66 and IP67 (322kph). Power Supply: 90-240VAC, 50/60Hz, 35W (up to 70W with 802.3at device on auxiliary products). Protection and Safety: CB clearance, UL60950-1, IEC60950-1, EN60950-1, CSA-C22.2 No. 60950-1. Radio Compliance: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8; EN 302 502; EN 301 893 Eire ComReg 02/71R1; UK Approval to IR2007; EMC: Europe – EN301 489-1; 4.9 GHz: FCC Part 90Y, RSS-111.
